Wednesday, January 9, 2019

Two More Animals


In my continuing effort to make the animals for the library, I made a second goat about the size of my first completed goat.  (The very first one I made is on the left, below; the new one I made is in the middle.)  Unfortunately, it goes over the door, and I forgot that I have less space there.  The middle goat head was too big by about 1/8 of an inch. *sigh*  So I made yet another one (the one on the right).   It is only about the size of a dime, and I shaped its base around a piece of the picture rail that runs around the room, so that it can fit over the rail when hung.


Next I moved on to what I initially thought was some species of antelope.  Based on its coloring and lack of markings, however, I've decided it's actually some kind of sheep.  In any event, I only had a picture to work from this time, but I am very pleased with how he turned out.  (OK.  I had one first try that never made it to the baking stage, because I fiddled around with his head for so long that the clay got a little too warm, and his neck basically turned into a ribbon.)  But this guy I like.  😊  I initially had his eyes in the wrong place (more on the top of his head), so I filled them in and did a second short bake, then I used my pin vise to drill holes in the correct place (on the sides of his head).  I actually like the way the drilled holes worked for housing the microbeads.  Here he is painted and ready for flocking.


He was much quicker to flock, because I only needed the powder flock.  There were no "long" fur pieces that I needed to attach.  However, I couldn't find a color of floss I liked, so I used two colors—one a bit darker and one a bit lighter than I wanted.  I pulled each color's six strands of DMC floss apart, then alternated the two colors in the bunch of strands I used for snipping my flock (see steps 12 and 13 in this link).  Together, they made the color I wanted.  I used my Silhouette Cameo to cut the mounting plaque—it's three layers of thin chipboard and one of mahogany scrapbooking paper.  


After I glued him to the plaque with JB Weld, I filled in around the edges with more flock.


My second goat is on the right, above.  He looks a bit fluffier than the first one.  With him, I put a layer of the powder flock all over him before laying down the longer pieces of "fur."  Mountain goats have quite heavy coats, for obvious reasons.  I think I'm going to add a little more powder flock to the face of my first goat.  My brother thinks my goats look a lot like dogs (except for the heavy brows), and there is definitely more of a "cute" factor to all my animals than their real-life counterparts.



From this angle, my sheep/ram looks kind of like a teddy bear.  I guess that's fitting.



I am going to take a break before making the boar's head, for which I want to try the air-dry clay that Brae recommended.  There is at least one more chair to make, probably two.  I received an engraving tool from my mother for Christmas, and there is a carved chair in the library that is calling my name. . . .  😊


8 comments:

  1. Can't wait to see the Boar and the chair!

    ReplyDelete
  2. Okay Deb, it is time to open your Etsy shop....The animals are good!

    ReplyDelete
    Replies
    1. Thanks, Carrie! I don't know if they're that good, but I am happy with them.

      Delete
  3. Well these new guys are just adorable, and your animal making skills are so impressive!!! I can't wait for your report on the engraver - it looks like it could be such a fun and useful tool for customization!!! But in half scale?!? You are the right gal because you are tenacious, brave and patient!

    ReplyDelete
    Replies
    1. Thanks, Jodi! I'm really excited about using the new tool, although I will definitely practice first. Its tip is very tiny, so I think (hope) it will work in half scale.

      Delete
  4. I think that evenTeddy would have thought that these 3 critters would have been too cute to shoot but perhaps he didn't discriminate.
    Nevertheless,I think that your sculpting efforts are already pretty Incredible AND your skills continue to improve - WOW!
    In the process you have proven to yourself that nothing is impossible once you've set your mind to it, so amid the wild Applause it time to Take Your Bow! :D

    ReplyDelete
    Replies
    1. Thanks, Elizabeth! I hope Teddy would have agreed with you. :-) And it's fun when I try something new, and it turns out pretty well. I appreciate the cheering section!

      Delete
  5. Bravo! I love all the little animal heads!

    ReplyDelete